• 5 pieces of 2 ft x 8ft x 0.708 in plexiglas were purchased from Laird Plastics, Inc.
  
• The pieces were cut as follows:
  
  
  Pieces1 & 2 -- Leave whole. These are the two 2 ft x 8 ft side pieces.
  
  
  Piece 3 -- Make one lengthwise cut. The resulting two 1 ft x 8 ft pieces are the top and bottom pieces.
  
  
  Piece 4 -- Cut four 3.3 in x 8 ft pieces to make the top and bottom edges, and twelve 3.23in x 22.6 in pieces to make the flying butresses.
  
  
  
  
  
  
  Piece 5 -- Cut six 3.3in x 22.6 in flying butresses and two 12 in x 25.4 in end pieces